Made these Tigerwood Adapters to be dual purpose for 22mm Diffuser and the Injector attachments in 14mm or 18mm. These can be used with theB0/B1/B2/Weedeater/Vrod 22mm Diffuser attachment (screened baller style or 18 hole).
At the top the have a small recess for the 22mm Diffuser. Just below that there is another small recess for the Injector head. The load depth is at 5/8", with a 1/2" counter sink so the load sits above the draw bore providing a more thorough extraction.
Simply place the heater on top of the adapter, ensure its seated flat for best results.
Tested end to end, lathe to user ensuring great performance.
Cleaning:First off you should never soak or submerge any of the wood stems I make. Simply take a cotton swab dipping it in high proof alcohol, squeeze out the excess then swab out the inner portion of the stem to remove any buildup doing this as needed. Let dry, you’re good to go.
