Ed's CH Matrix Sleeve

Did something a little different here, normally don't do pieces that work with glass but after a couple pokes, prods and maybe a foot in the butt I gave it a go. Learned something from designing the CT Matrix was able to implement into these making them even better than before.

This was designed and made to work as an alternative to the Cannabis Hardware Matrix Bowl Can. Did it in Tigerwood which most of you all are familiar with from other products offered for the FlowerPot and other items. It easily accepts the glass or metal 22mm inserts in the top as well as their glass joint underneath with a high temp oring seated around both within a small recess. Since it wont get hot to the touch there is no need for a handle. 

These will come with a SS Screen, 2 fitted orings (1 for the insert / 1 for the joint).

These will not come with any glass!

Cleaning: First off you should never soak or submerge any of the wood stems or adapters I make. Simply take a cotton swab dipping it in high proof alcohol, squeeze out the excess then swab out the inner portion of the stem to remove any buildup doing this as needed. Let dry, you’re good to go.