The BTG by Vices

The BTG is a custom mini quartz banger with an 8mm connection. It is specifically designed to work alongside the glass cooling chamber built into the JoyStik and BoomStik for a smooth, clean hit. 

To install the BTG, you need to remove the cap from your Stik device and insert the BTG into the 8mm connection as shown in the video below.

HEATING INSTRUCTIONS

You have two options when it comes to using the BTG. You can do a cold start, which involves placing the concentrate into the BTG before heating it and then heating both the BTG and the concentrate together. Or you can do a hot start which involves pre-heating the empty BTG first, then dropping in your concentrate with a hot knife or dab tool. 

Both options produce an awesome experience, it just comes down to personal preference.

  • Cold Start

    Step 1: Place your concentrate inside the BTG using a hot knife.

    Step 2: Place the cap on top of the BTG. 

    Step 3: Using a butane lighter, heat the BTG by aiming the flame at the flat bottom until it reaches the desired temperature or until the concentrate starts to bubble or produce vapour.

  • Hot Start

    Step 1: Heat the empty BTG with a butane lighter by aiming the flame at the flat bottom until the BTG reaches temperature.

    Step 2: Once the BTG reaches temperature, drop your concentrate in using a hot knife and place the cap on top.

Inhale and enjoy!

Once you are done heating, it's time to inhale and enjoy!

For best results, we recommend using a thermometer to ensure the BTG has reached the ideal temperature. Please see guide below for temperature recommendations.

CLEANING THE BTG

We recommend cleaning the BTG after each use and deep cleaning weekly.

After each use, the BTG can be cleaned by wiping it with a cotton tip dipped in ISO.

For a deep clean, remove the BTG from the TED device and soak in ISO then wipe with a cotton tip.

Please also remember to also follow the recommended cleaning instructions for your Stik!

SAFETY WARNINGS

The BTG is designed for use with a manual thermal extraction device that has an 8mm connection.

The BTG will become extremely hot when in use. Please exercise caution and do not directly touch the BTG whilst hot. After use, the BTG needs to be placed on a heat proof surface to allow time for it to cool down before handling.

Ensure to aim the flame at the flat bottom of the BTG. If the flame is positioned too close to the 8mm connection, it may damage the O Ring.

For use with legal materials only. Please ensure you comply with all applicable laws.

Keep out of reach of children. 

The BTG and cap is made from quartz which is extremely fragile and can become sharp if broken. Exercise caution when in use.

The cap is designed to sit loosely on top of the BTG and will fall off if the BTG is tipped during use. Please ensure the BTG remains upright during use.

RECOMMENDED TEMPERATURE GUIDE

The temperature you use for your dabs will affect the flavour, strength and smoothness of your concentrate.

Lower temperatures will enhance the terpenes in your concentrate and produce a smoother, more flavourful experience. Higher temperatures will increase the power and effect of your hit.

The ideal temperature will depend on your personal preference and may vary depending on what concentrate you are using. This guide is designed to give you a little bit of an idea of the different ranges of temperature and how they can affect your concentrate.

THE BTG

Take your dabs anywhere with The Banger to Go by Vices! 

Dab at your convenience without sacrificing flavour or cost.

Check it out

BTG x TED Bundles

Check out the BTG bundles for a true portable set up that allows you to choose between concentrate and flower.

Shop Bundles