THE KING OF THE STIKS

The BoomStik is a heavy-duty, stainless steel thermal extraction device that ditches the batteries and delivers massive hits using a butane torch or induction heater.

WHAT'S INSIDE THE BOX

THE SPECS

Biggers specs, increased performance. 

  • The BoomStik

    The BoomStik is built from high-grade stainless steel to maximise its thermal mass and lock in heat for longer extractions. To handle that extra power, the body is wrapped in a thick, textured silicone band that creates a dedicated "safe-to-touch" grip while the device is running hot.

  • The  Tip

    The tip houses the bowl and the top cap. The heating zone sits right below the octagon for ease of use and the adjustable airflow allows you to control the strength of your hit.

  • The Stem

    The XL stem connects to the tip via an 8mm connection and houses a comfortable, ergonomically designed mouthpiece that tapers to natively fit 10mm, 14mm, and 18mm female glass rigs.

  • Cooling Chamber

    The glass intercooler stem is packed with 4 large glass pearls that create a pure glass air path. These oversized beads disrupt the hot air, efficiently stripping away harsh heat to thoroughly cool the vapour before it reaches your lips for a clean, smooth draw.

  • The Coins

    The top cap is engineered to hold a massive amount of thermal energy, housing 5 of the Vices signature stainless steel star coins. These heavy-duty coins act as a powerful heat source when torched with a butane flame or placed in an induction heater.

  • The Dosing Cups

    The bowl features our signature threaded system, allowing you to switch between the two different sized dosing cups with ease. The small cup holds 0.15g and the large cup hold 0.4g of material, giving you complete control over your session. Designed to last, the dosing cups are reusable which avoids the need for replacement screens.

User Guide

  • Fill Dosing Cup

    Unscrew the cap anti-clockwise. Insert your choice of the small or large dosing cup by screwing the cup into the base of the bowl and fill the cup with material. Avoid overfilling to ensure there is enough room for airflow.

  • Heat - Butane Torch

    Holding the BoomStik by the protective silicone band and pointing the cap upwards, heat the cap by placing the tip of your torch flame directly onto the surface. You want to angle the flame slightly upward, aiming just above the ring of octagons and keeping the torch positioned roughly 1cm away. Rotate the device steadily while heating and listen closely for the audible click that tells you the BoomStik has reached temperature.

  • Heat - Induction Heater

    If using an induction heater, turn on your induction heater and insert the BoomStik into the heating element cap first. Allow the device to heat up until you hear the audible click. Keep in mind that different brands of induction heaters will vary, so how deep you insert the BoomStik and the overall heat-up time will depend on the specific unit you are using.

Listen for the click, then inhale!

Clean Guide

  • Disassemble

    Take apart your BoomStik by removing the cap, tip, stem, silicone band, and mouthpiece. Please make sure the device has cooled down completely. 

  • ISO Clean

    Place all of the components excluding the silicone band and the cap into isopropyl alcohol to soak for 15 to 30 minutes. If you have used a screwdriver to remove the heat-retention coins from the cap, they can be tossed into the ISO separately. Use a cotton swab or a small brush to scrub away any remaining residue. To clean the cap itself, gently wipe down the inside and outside surfaces using a dampened cotton swab.

  • Rinse & Dry

    Once clean, rinse the components of the BoomStik (save for the cap) with warm water and leave them out to air-dry thoroughly. Once every piece is dry, slide and thread the components back together so it is ready for your next session. We recommend cleaning your BoomStik on a regular basis to keep your airflow wide open and prevent any heavy buildup.

  • Reassemble

    After the parts dry completely, reassemble the device to prepare for your next session.

The BoomStik

With a clean, straightforward design and hard-hitting thermal performance, the BoomStik is a perfect choice for anyone looking to step up their session whether at home with a rig or on the go. 

BUY NOW!